Found 10360 publications. Showing page 389 of 415:
A rare event of mixed biomass-burning and polluted dust aerosols was observed over Athens, Greece (37.9° N, 23.6° E), during 21–26 May 2014. This event was studied using a synergy of a 6-wavelength elastic-Raman-depolarization lidar measurements, a CIMEL sun photometer, and in situ instrumentation. The FLEXPART dispersion model was used to identify the aerosol sources and quantify the contribution of dust and black carbon particles to the mass concentration. The identified air masses were found to originate from Kazakhstan and Saharan deserts, under a rare atmospheric pressure system. The lidar ratio (LR) values retrieved from the Raman lidar ranged within 25–89 sr (355 nm) and 35–70 sr (532 nm). The particle linear depolarization ratio (δaer) ranged from 7 to 28% (532 nm), indicating mixing of dust with biomass-burning particles. The aerosol optical depth (AOD) values derived from the lidar ranged from 0.09–0.43 (355 nm) to 0.07–0.25 (532 nm). An inversion algorithm was used to derive the mean aerosol microphysical properties (mean effective radius (reff), single scattering albedo (SSA), and mean complex refractive index (m)) inside selected atmospheric layers. We found that reff was 0.12–0.51 (±0.04) µm, SSA was 0.94–0.98 (±0.19) (at 532 nm), while m ranged between 1.39 (±0.05) + 0.002 (±0.001)i and 1.63 (±0.05) + 0.008 (±0.004)i. The polarization lidar photometer networking (POLIPHON) algorithm was used to estimate the vertical profile of the mass concentration for the dust and non-dust components. A mean mass concentration of 15 ± 5 μg m−3 and 80 ± 29 μg m−3 for smoke and dust was estimated for selected days, respectively. Finally, the retrieved aerosol microphysical properties were compared with column-integrated sun photometer CIMEL data with good agreement
2024
The Troll Observing Network (TONe): plugging observation holes in Dronning Maud Land, Antarctica
Understanding how Antarctica is changing and how these changes influence the rest of the Earth is fundamental to the future robustness of human society. Strengthening our understanding of these changes and their implications requires dedicated, sustained and coordinated observations of key Antarctic indicators. The Troll Observing Network (TONe), now under development, is Norway’s contribution to the global need for sustained, coordinated, complementary and societally relevant observations from Antarctica. When fully implemented within the coming three years, TONe will be a state-of-the-art, multi-platform, multi-disciplinary observing network in data-sparse Dronning Maud Land. A critical part of the network is a data management system that will ensure broad, free access to all TONe data to the international research community.
2024
2024
2024
European cities air quality ranking: a new methodology
The EEA has introduced the European City Air Quality Viewer, a tool to assess and compare air quality in European cities. However, this method provides an incomplete picture of air quality as it relies solely on PM2.5 data from monitoring stations, excluding cities lacking monitoring stations and other relevant pollutants such as NO2 and O3. A promising alternative to the current methodology is proposed to reduce these limitations, offering a comprehensive approach to assessing and comparing health risks linked to exposure to multiple pollutants in urban settings. Leveraging continuous air quality maps and population-weighted concentrations enhances coverage and consistency in risk estimation across cities. Additionally, it allows for ranking based on multiple pollutants, unlike the current method, which focuses solely on PM2.5 levels. This approach integrates mortality risk assessments associated with PM2.5, NO2, and O3 exposure, aligning with the Environmental Burden of Disease assessments published by the ETC HE, together with the EEA.
ETC/HE
2024
Hulun Lake, the largest inland steppe lake in China, is encountering severe water quality degradation. Estuaries play important roles in material and energetic exchange between rivers and lakes. The water quality at the estuaries of Hulun Lake directly reflects the impact of both human activities and natural factors on the lake’s overall water quality, especially during rainfall events. From July 28, 2021, to August 4, 2021, water samples from 62 sites were collected in the three estuaries of Hulun Lake before and after a moderate rainfall event. 13 water parameters, including dissolved oxygen (DO), Turbidity (Tur), Total Nitrogen (TN), Total Phosphorus (TP), Total Organic Nitrogen (TON), and Total Organic Phosphorus (TOP) were measured. The spatio-temporal distribution of water quality in the estuaries was assessed based on water quality index (WQI). Besides, an improved approach integrating stepwise linear regression (SLR) and principal component analysis (PCA) was utilized to construct a WQImin model for an effective assessment of water quality in these estuaries. Furthermore, the absolute principal component scores-multiple linear regression (APCS-MLR) model was employed to identify and quantify the environmental drivers underlying the water quality in the estuaries. The results of WQI indicated that the water quality of the sites in the estuaries of Hulun Lake was “medium” or “poor”, both before and after the rainfall, with a general deterioration in water quality in response to the rainfall. The simplified WQImin model consisted of 5 crucial parameters (i.e., TN, TP, ammonium (NH4+-N), Tur, and permanganate index (CODMn)), and it performed well without parameter weights. Spatial differences in some water parameters among the estuaries were detected, which were attributed to the natural factors and human activities upstream. The principal environmental factors affecting the water quality in the estuaries consisted of hydrodynamic processes, internal phosphorus release, external phosphorus input, external nitrogen input, nitrification in the estuaries, and external organic input and internal organic release. Therefore, we propose basin management strategies such as limiting grazing pressure, adopting enclosed pasture, wetland restoration, optimizing water renewal cycle in Hulun Lake, and transboundary water quality management to tackle water contamination in Hulun Lake.
2024
Monitoring air quality in ports and nearby cities is crucial to understanding the role of emissions from shipping and other port activities. This report analyzes air quality in 23 European ports, revealing limited observations in and around port areas. Only 5 of the 23 ports had at least one air quality sampling point for NO2 and PM10 inside the port area. Concentrations in nearby cities can be up to double (NO2) and 74% higher (PM10) when the wind comes from the port. EEA air quality maps showed higher annual mean NO2 concentrations in port areas compared to surrounding regions, with some ports exceeding the 2030 limit value of 20 µg/m³. Annual mean PM10 concentrations were also higher in port areas, with nine ports exceeding the new limit value. The limited number of sampling points makes it challenging to assess trends in NO2 and PM10 concentrations. International shipping emissions significantly contribute to NO2 levels in port cities, as shown by pollution episodes in Antwerpen and Barcelona.
European Topic Centre on Human Health and the Environment (ETC HE)
2024
2024
NILU har, på oppdrag fra Glasopor AS ved Onsøy i Fredrikstad, kartlagt utslipp av støv fra anlegget og effekter på ytre miljø. Bedriften ønsker å oppgradere anlegget og øke produksjonen og har søkt om ny utslippstillatelse. I den forbindelse har Statsforvalteren oppfølgende spørsmål med krav om dokumentasjon knyttet til utslipp av støv og påvirkning på ytre miljø. For å svare på disse spørsmålene har NILU gjennomført målinger, beregning av utslipp og spredningsberegninger. Rapporten skal inngå i dokumentasjonen som oversendes norske myndigheter.
NILU
2024
Zürich II Statement on Per- and Polyfluoroalkyl Substances (PFASs): Scientific and Regulatory Needs
Per- and polyfluoroalkyl substances (PFASs) are a class of synthetic organic chemicals of global concern. A group of 36 scientists and regulators from 18 countries held a hybrid workshop in 2022 in Zürich, Switzerland. The workshop, a sequel to a previous Zürich workshop held in 2017, deliberated on progress in the last five years and discussed further needs for cooperative scientific research and regulatory action on PFASs. This review reflects discussion and insights gained during and after this workshop and summarizes key signs of progress in science and policy, ongoing critical issues to be addressed, and possible ways forward. Some key take home messages include: 1) understanding of human health effects continues to develop dramatically, 2) regulatory guidelines continue to drop, 3) better understanding of emissions and contamination levels is needed in more parts of the world, 4) analytical methods, while improving, still only cover around 50 PFASs, and 5) discussions of how to group PFASs for regulation (including subgroupings) have gathered momentum with several jurisdictions proposing restricting a large proportion of PFAS uses. It was concluded that more multi-group exchanges are needed in the future and that there should be a greater diversity of participants at future workshops.
2024
Roadmap for action for advancing aggregate exposure to chemicals in the EU
The European Food Safety Authority (EFSA) has a goal to efficiently conduct aggregate exposure assessments (AEAs) for chemicals using both exposure models and human biomonitoring (HBM) data by 2030. To achieve EFSA's vision, a roadmap for action for advancing aggregate exposure (AE) in the EU was developed. This roadmap was created by performing a series of engagement and data collection activities to map the currently available methods, data, and tools for assessing AE of chemicals, against the needs and priorities of EFSA. This allowed for the creation of a AEA framework, identification of data and knowledge gaps in our current capabilities, and identification of the challenges and blockers that would hinder efforts to fill the gaps. The roadmap identifies interdependent working areas (WAs) where additional research and development are required to achieve EFSA's goal. It also proposes future collaboration opportunities and recommends several project proposals to meet EFSA's goals. Eight proposal projects supported by SWOT analysis are presented for EFSA's consideration. The project proposals inform high-level recommendations for multi-annual and multi-partner projects. Recommendations to improve stakeholder engagement and communication of EFSA's work on AEA were gathered by surveying stakeholders on specific actions to improve EFSA's communication on AE, including webinars, virtual training, social media channels, and newsletters.
2024
Surface warming in Svalbard may have led to increases in highly active ice-nucleating particles
The roles of Arctic aerosols as ice-nucleating particles remain poorly understood, even though their effects on cloud microphysics are crucial for assessing the climate sensitivity of Arctic mixed-phase clouds and predicting their response to Arctic warming. Here we present a full-year record of ice-nucleating particle concentrations over Svalbard, where surface warming has been anomalously faster than the Arctic average. While the variation of ice-nucleating particles active at around −30 °C was relatively small, those active at higher temperatures (i.e., highly active ice-nucleating particles) tended to increase exponentially with rising surface air temperatures when the surface air temperatures rose above 0 °C and snow/ice-free barren and vegetated areas appeared in Svalbard. The aerosol population relevant to their increase was largely characterized by dust and biological organic materials that likely originated from local/regional terrestrial sources. Our results suggest that highly active ice-nucleating particles could be actively released from Arctic natural sources in response to surface warming.
2024
FLEXPART version 11: improved accuracy, efficiency, and flexibility
Numerical methods and simulation codes are essential for the advancement of our understanding of complex atmospheric processes. As technology and computer hardware continue to evolve, the development of sophisticated code is vital for accurate and efficient simulations. In this paper, we present the recent advancements made in the FLEXible PARTicle dispersion model (FLEXPART), a Lagrangian particle dispersion model, which has been used in a wide range of atmospheric transport studies over the past 3 decades, extending from tracing radionuclides from the Fukushima nuclear disaster, to inverse modelling of greenhouse gases, and to the study of atmospheric moisture cycles.
This version of FLEXPART includes notable improvements in accuracy and computational efficiency. (1) By leveraging the native vertical coordinates of European Centre for Medium Range Weather Forecasts (ECMWF) Integrated Forecasting System (IFS) instead of interpolating to terrain-following coordinates, we achieved an improvement in trajectory accuracy, leading to a ∼8 %–10 % reduction in conservation errors for quasi-conservative quantities like potential vorticity. (2) The shape of aerosol particles is now accounted for in the gravitational settling and dry-deposition calculation, increasing the simulation accuracy for non-spherical aerosol particles such as microplastic fibres. (3) Wet deposition has been improved by the introduction of a new below-cloud scheme, by a new cloud identification scheme, and by improving the interpolation of precipitation. (4) Functionality from a separate version of FLEXPART, the FLEXPART CTM (chemical transport model), is implemented, which includes linear chemical reactions. Additionally, the incorporation of Open Multi-Processing parallelisation makes the model better suited for handling large input data. Furthermore, we introduced novel methods for the input and output of particle properties and distributions. Users now have the option to run FLEXPART with more flexible particle input data, providing greater adaptability for specific research scenarios (e.g. effective backward simulations corresponding to satellite retrievals). Finally, a new user manual (https://flexpart.img.univie.ac.at/docs/, last access: 11 September 2024) and restructuring of the source code into modules will serve as a basis for further development.
2024