Found 10544 publications. Showing page 104 of 422:
2006
Quantifying the Spatio-Ecological Context of Urban Nature-Based Solutions Across European Cities.
Nature-Based Solutions (NBS) are increasingly implemented to address urban environmental challenges, yet the surrounding spatial context in which they are embedded may influence the conditions supporting their ecological functioning. This study applied an integrated remote sensing-based spatial diagnostic framework combining Sentinel-2 spectral indices and land-cover composition metrics to characterize and compare the surrounding environments of five NBS sites in Oslo, Riga, Milan, St. Gallen, and Lublin. The Normalized Difference Vegetation Index (NDVI), Normalized Difference Moisture Index (NDMI), and Normalized Difference Built-Up Index (NDBI) were analyzed within 100 m, 300 m, and 500 m buffer zones alongside land-cover composition assessments. The analysis revealed substantial variation in vegetation greenness, moisture conditions, built-up intensity, and landscape composition. Three spatial-context profiles were identified: low-density/peri-urban settings, exemplified by the Riga NBS site with consistently high NDVI (0.483–0.374), positive NDMI (0.230–0.171), and strongly negative NDBI (−0.230 to −0.171); mixed urban settings, represented by the Oslo, Lublin, and St. Gallen NBS sites; and dense urban settings, represented by the Milan NBS site, which exhibited the lowest NDVI (0.197–0.124), declining NDMI (0.054 to −0.014), and positive NDBI beyond 300 m (0.001–0.014). These findings demonstrate that surrounding landscape characteristics provide a meaningful basis for distinguishing urban NBS settings. The proposed replicable framework can support context-sensitive planning by identifying areas where complementary landscape-scale measures, including de-paving, strategic greening, and improved landscape connectivity, may be considered to strengthen the broader environmental conditions surrounding NBS.
2026
2013
2025
Non-Technical Summary
Digital Product Passports (DPPs) could help make products easier to repair, refurbish, and recycle by improving access to information about their materials and life cycle. This study examines their potential across major European product groups, including heat pumps, solar panels, printers, ICT equipment, and batteries. For the EU27, we estimate that DPP-enabled improvements could raise circularity from 14.8% to 45.0%, with substantial material and economic savings. The results provide a practical baseline for assessing how digital tools may support the European transition towards a more circular economy.
Technical Summary
DPPs are expected to support circular economy strategies by improving information availability across product value chains. Building on the CE-RISE project, we assess their potential contribution to recycling- and refurbishment-related circularity for heat pumps, photovoltaic panels, printers, ICT equipment, and batteries. The analysis combines production and trade statistics, a PRISMA 2020-compliant systematic review, and evidence-informed scenario parameterisation. We construct material-flow and circularity indicators for Europe over 2010–2023, distinguish the EU27 from non-EU Europe (Switzerland, Norway, and Türkiye), and quantify a DPP scenario with sensitivity intervals. For the EU27 in 2023, baseline circularity is estimated at 14.8%, compared with 45.0% under the DPP scenario (95% sensitivity interval: 28.6–61.4). This corresponds to potential savings of 2.5 Mt of materials and EUR 27.9 billion (bn), with sensitivity intervals of 1.1–3.8 Mt and EUR 12.7–43.1 bn. We additionally estimate refurbishment-related employment exposure using Eurostat production value per employee in NACE J. The results establish an evidence-informed baseline for evaluating DPP-enabled circularity gains and future policy impacts.
Social Media Summary
DPPs could raise EU27 circularity from 14.8% to 45.0%, with major material and economic savings.terial and economic savings. The results provide a practical baseline for assessing how digital tools may support the European transition towards a more circular economy.
2026
2017
In this paper, the effect of the lockdown measures on nitrogen dioxide (NO2) in Europe is analysed by a statistical model approach based on a generalised additive model (GAM). The GAM is designed to find relationships between various meteorological parameters and temporal metrics (day of week, season, etc.) on the one hand and the level of pollutants on the other. The model is first trained on measurement data from almost 2000 monitoring stations during 2015–2019 and then applied to the same stations in 2020, providing predictions of expected concentrations in the absence of a lockdown. The difference between the modelled levels and the actual measurements from 2020 is used to calculate the impact of the lockdown measures adjusted for confounding effects, such as meteorology and temporal trends. The study is focused on April 2020, the month with the strongest reductions in NO2, as well as on the gradual recovery until the end of July. Significant differences between the countries are identified, with the largest NO2 reductions in Spain, France, Italy, Great Britain and Portugal and the smallest in eastern countries (Poland and Hungary). The model is found to perform best for urban and suburban sites. A comparison between the found relative changes in urban surface NO2 data during the lockdown and the corresponding changes in tropospheric vertical NO2 column density as observed by the TROPOMI instrument on Sentinel-5P revealed good agreement despite substantial differences in the observing method.
2021
2021
2016
2024
2016
Quantifying European SF6 emissions from 2005 to 2021 using a large inversion ensemble
Abstract. Sulfur hexafluoride (SF6) is a highly potent and long-lived greenhouse gas whose atmospheric concentrations are increasing due to human emissions. In this study, we determine European SF6 emissions from 2005 to 2021 using a large ensemble of atmospheric inversions. To assess uncertainty, we systematically vary key inversion parameters across 986 sensitivity tests and apply a Monte Carlo approach to randomly combine these parameters in 1003 additional inversions. Our analysis focuses on high-emitting countries with robust observational coverage – UK, Germany, France, and Italy – while also examining aggregated EU-27 emissions. SF6 emissions declined across all studied regions except Italy, largely attributed to EU F-gas regulations (2006, 2014), however, national reports underestimated emissions: (i) UK emissions dropped from 68 (47–77) t yr−1 in 2008 to 19 (15–26) t yr−1 in 2018, aligning with the reports from 2018 onward; (ii) French emissions fell from 78 (51–117) t yr−1 (2005) to 35 (19–54) t yr−1 (2021), exceeding reports by 88 %; (iii) Italian emissions fluctuated (25–48 t yr−1), surpassing reports by 107 %; (iv) German emissions declined from 182 (155–251) t yr−1 (2005) to 97 (88–104) t yr−1 (2021), aligning reasonably well with reports; (v) EU-27 emissions decreased from 403 (335–501) t yr−1 (2005) to 225 (191–260) t yr−1 (2021), exceeding reports by 20 %. A substantial drop from 2017 to 2018 mirrored the trend in southern Germany, suggesting regional actions were taken as the 2014 EU regulation took effect. Our sensitivity tests highlight the crucial role of dense monitoring networks in improving inversion reliability. The UK system expansions (2012, 2014) significantly enhanced result robustness, demonstrating the importance of comprehensive observational networks in refining emission estimates.
2025
Quantifying European SF6 emissions (2005-2021) using a large ensemble of atmospheric inversions
Sulfur hexafluoride (SF₆) is an extremely potent (GWP100 = 24,300) and long-lived greenhouse gas whose atmospheric concentrations continue to rise due to anthropogenic emissions. Europe represents a particularly relevant test case for investigating SF₆ emissions, as successive EU F-gas regulations over the past two decades have aimed to substantially reduce emissions. A key question is whether these regulatory measures are reflected in observed emission trends and whether reported national inventories are consistent with observation-based estimates. In this study, we quantify European SF₆ emissions for the period 2005–2021 using a large ensemble of atmospheric inversions with a strong focus on uncertainty characterization. Uncertainties are assessed using an extensive set of sensitivity tests in which key inversion parameters are systematically varied, while final uncertainties are quantified via a Monte Carlo ensemble that randomly samples combinations of these parameters. This allows us to identify the main sources of uncertainty and to evaluate the robustness of inferred emission trends.Our analysis focuses on countries with relatively dense observational coverage - the United Kingdom, Germany, France, and Italy - while also examining aggregated emissions for the EU-27. The inversion results reveal declining SF₆ emissions in all studied regions except Italy, broadly consistent with the timing of EU F-gas regulations (842/2006, 517/2014). In several countries, inferred emissions exceed reported national inventories, although the agreement generally improves in more recent years. At the EU-27 scale, emissions exhibit a pronounced decline between 2017 and 2018, coinciding with a marked reduction in emissions from southwestern Germany, suggesting regional actions were taken as the 2014 regulation took effect.Our sensitivity tests highlight the crucial role of dense and sustained atmospheric monitoring networks for robust inversion-based emission estimates. In particular, expansions of the UK observing system in 2012 and 2014 lead to significant reductions in emission uncertainties, demonstrating the importance of comprehensive observational networks in refining emission estimates.
2026
2023
2014
2016
2016
2007
2007
2010
2003
2005
2003
Microplastic (MP) is of growing concern to environmental and human health. This study investigated three analytical approaches to measure MP in tissues of salmonids. The study aimed to 1) determine and demonstrate the sensitivity of current analytical methods for MP in salmon tissues for the three different quantitative methods, 2) compare the utility of the different methods in terms of cost, time and sensitivity 3) quantify MP in a relevant selection of tissues of farmed and wild salmon in order to establish likely indicator organs for future documentation purposes. We here present the results, compare the methods and discuss uncertainties and needs for further method development.
NORCE Research AS
2020