Found 9758 publications. Showing page 342 of 391:
Wetland emission and atmospheric sink changes explain methane growth in 2020
Atmospheric methane growth reached an exceptionally high rate of 15.1 ± 0.4 parts per billion per year in 2020 despite a probable decrease in anthropogenic methane emissions during COVID-19 lockdowns. Here we quantify changes in methane sources and in its atmospheric sink in 2020 compared with 2019. We find that, globally, total anthropogenic emissions decreased by 1.2 ± 0.1 teragrams of methane per year (Tg CH4 yr−1), fire emissions decreased by 6.5 ± 0.1 Tg CH4 yr−1 and wetland emissions increased by 6.0 ± 2.3 Tg CH4 yr−1. Tropospheric OH concentration decreased by 1.6 ± 0.2 per cent relative to 2019, mainly as a result of lower anthropogenic nitrogen oxide (NOx) emissions and associated lower free tropospheric ozone during pandemic lockdowns. From atmospheric inversions, we also infer that global net emissions increased by 6.9 ± 2.1 Tg CH4 yr−1 in 2020 relative to 2019, and global methane removal from reaction with OH decreased by 7.5 ± 0.8 Tg CH4 yr−1. Therefore, we attribute the methane growth rate anomaly in 2020 relative to 2019 to lower OH sink (53 ± 10 per cent) and higher natural emissions (47 ± 16 per cent), mostly from wetlands. In line with previous findings, our results imply that wetland methane emissions are sensitive to a warmer and wetter climate and could act as a positive feedback mechanism in the future. Our study also suggests that nitrogen oxide emission trends need to be taken into account when implementing the global anthropogenic methane emissions reduction pledge.
2022
2022
This report aims to support the on-going revision of the Ambient Air Quality Directives by providing a series of recommendations on the reciprocal exchange of information and reporting of ambient air quality (e-reporting) following the Commission Implementing Decision (2011/850/EU). It builds on the experience and understanding from the EEA and technical experts at its European Topic Centre for Human Health and the Environment (ETC HE) working with implementing provisions for reporting (IPR) and identifies areas for further efficiency gains in e-reporting, in particular concerning the H-K dataflows.
ETC/HE
2022
2022
2022
Electrification of residential heating and investment in building energy efficiency are central pillars of many national strategies to reduce carbon emissions from the built environment sector. Ireland has a strong dependence on oil use for central heating and a substantial share of homes still using solid fuels. The current national strategy calls for the retrofitting of 400,000 home heating systems with heat pumps by 2030, principally replacing oil fired heating systems. Displacing natural gas, oil and solid fuel boilers with heat pumps will have a favourable impact on climate outcomes. However, the impact on air pollutant outcomes is far more favourable when solid fuels are replaced, and the positive impact on ambient air quality is much enhanced where concentrated clusters of solid-fuel use are targeted. This research spatially analyses emissions and air pollutant concentration outcomes for both targeted and non-targeted deployments of heat pumps and shows that a focused deployment of just 3% of the national heat pump target on solid-fuel homes could offer similar progress on climate goals but with a substantial impact in terms of reducing air pollution hot spots. For the Irish residential heating season (October–March), the targeted solid fuel scenario delivers average PM2.5 concentration decreases of 20–34%. This paper shows that these targeted communities are often in areas of relative deprivation, and as such, direct support for fabric retrofitting and heat pump technology installation offers the potential to simultaneously advance climate, air and just transition policy ambitions.
Elsevier
2022
Status report of air quality in Europe for year 2020, using validated data
This report presents summarised information on the status of air quality in Europe in 2020, based on validated air quality monitoring data officially reported by the member and cooperating countries of the EEA. It aims at informing on the status of ambient air quality in Europe in 2019 and on the progress towards meeting the European air quality standards for the protection of health, as well as the new WHO air quality guidelines. The report also compares the air quality status in 2020 with the previous three years. The pollutants covered in this report are particulate matter (PM10 and PM2.5), O3, NO2, benzo(a)pyrene (BaP), SO2, CO, benzene and toxic metals (As, Cd, Ni, Pb). Measured concentrations above the European air quality standards for PM10, PM2.5, O3, NO2 were reported by 20, 6, 21, and 8 European countries for 2020, respectively. Exceedances of the air quality standards for BaP, SO2, CO, and benzene were measured in, respectively, 11, 19, 2, and 0 European countries in 2020. Exceedances of European standards for toxic metals were reported by 7 stations for As, 0 for PB, 1 for Cd and 2 for Ni.
ETC/HE
2022
2022
2022
2022
2022
Operational retrievals of tropospheric trace gases from space-borne spectrometers are based on one-dimensional radiative transfer models. To minimize cloud effects, trace gas retrievals generally implement a simple cloud model based on radiometric cloud fraction estimates and photon path length corrections. The latter relies on measurements of the oxygen collision pair (O2–O2) absorption at 477 nm or on the oxygen A-band around 760 nm to determine an effective cloud height. In reality however, the impact of clouds is much more complex, involving unresolved sub-pixel clouds, scattering of clouds in neighbouring pixels, and cloud shadow effects, such that unresolved three-dimensional effects due to clouds may introduce significant biases in trace gas retrievals. Although clouds have significant effects on trace gas retrievals, the current cloud correction schemes are based on a simple cloud model, and the retrieved cloud parameters must be interpreted as effective values. Consequently, it is difficult to assess the accuracy of the cloud correction only based on analysis of the accuracy of the cloud retrievals, and this study focuses solely on the impact of the 3D cloud structures on the trace gas retrievals. In order to quantify this impact, we study NO2 as a trace gas example and apply standard retrieval methods including approximate cloud corrections to synthetic data generated by the state-of-the-art three-dimensional Monte Carlo radiative transfer model MYSTIC. A sensitivity study is performed for simulations including a box cloud, and the dependency on various parameters is investigated. The most significant bias is found for cloud shadow effects under polluted conditions. Biases depend strongly on cloud shadow fraction, NO2 profile, cloud optical thickness, solar zenith angle, and surface albedo. Several approaches to correct NO2 retrievals under cloud shadow conditions are explored. We find that air mass factors calculated using fitted surface albedo or corrected using the O2–O2 slant column density can partly mitigate cloud shadow effects. However, these approaches are limited to cloud-free pixels affected by surrounding clouds. A parameterization approach is presented based on relationships derived from the sensitivity study. This allows measurements to be identified for which the standard NO2 retrieval produces a significant bias and therefore provides a way to improve the current data flagging approach.
2022
Ingestion of crumb rubber and uptake of associated contaminants in lumpfish (cyclopterus lumpus)
Car tire rubber represents an important source of microplastics, mainly through abrasion of tire dust on roads, but also in the form of crumb rubber (CR) produced from end-of-life vehicle tires that is used in artificial sport fields, playgrounds and other urban surfaces. CR is known to contain a mixture of different organic chemicals and metals. The leachate of tire particles has previously been shown to be toxic to marine invertebrates and some fish species. Here, lumpfish (Cyclopterus lumpus) were exposed to CR particles (2-4 µm) in seawater for 7 days, followed by a 14-day depuration period. Blood samples were collected from the fish, together with the stomach and gut for visual detection of CR in the fish intestines. A comprehensive non-target screening analysis of organic chemical content in the blood was conducted using HRGC/HRMS (Thermofisher, Orbitrap). In addition to the screening, specific focus was given to quantification of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) and its degradation product 6PPD-quinone, known toxicants. Tissue samples were also analyzed for metals by ICP-MS. The exposed lumpfish were found to readily ingest CR alongside food under laboratory conditions. The quantity of CR in intestine samples increased during the exposure period, reaching a maximum level directly after the exposure period ended (day 8). A measurable decrease of CR particles was observed throughout the depuration period, although some individuals still contained CR at the end of the depuration period (day 21). The organic chemicals 6PPD and 6PPD-quinone, as well as other CR-related chemicals, were detected in the blood both on day 7 and day 21. No increased in concentration over time was observed for any of the 10 metals were detected in blood of exposed lumpfish. The study confirms that lumpfish actively ingest CR, causing the transfer of CR-related chemicals to the blood.
2022
Best practices for local and regional air quality management. Version 1.
FAIRMODE is the Forum for Air Quality Modeling created for exchanging experience and results from air quality modeling in the context of the Air Quality Directives (AQD) and for promoting the use of modeling for air quality assessment and management. FAIRMODE is organized in different activities and task, called cross-cutting tasks, to which representative of Member States and experts participate. Among the different activities, one is devoted to Air Quality management practices, called cross-cutting task 5 (CT5). This report is indeed based on the last activities of the FAIRMODE Cross Cutting Task 5 (CT5), focusing, in particular, on elaborating recommendations to support local, regional and national authorities in the use of modelling for the development of air quality plans, defining on how to quantify emission changes associated to a set of measures, and quantifying their impacts in terms of concentration (using an ‘impact pathway approach’ from ‘abatement measure’ to ‘emissions’ to ‘concentrations’). This is done on one side taking advantage of the results already produced by previous FAIRMODE working groups and in coordination with existing activities under other FAIRMODE CTs. On the other side, examples of best practice policies are presented, focusing on Low emission zones: with an example on Antwerp and Copenhagen, Measures on non-exhaust traffic to reduce PM, with an application on Stockholm. How to reduce ozone concentrations, with a focus on local to global contributions. How to build an air quality plan in an integrated way, with an application on Italy. How to evaluate the socio-economic impact of measures, focusing on a case study on UK. The results show how different pollutants should be tackled differently, the importance of integration among different sectoral plans (on emissions, greenhouse gases mitigation, …) and also how other dimensions of the problem (i.e. social aspects) should be considered when building air quality plans.
Publications Office for the European Union
2022
Havforskningsinstituttet
2022
2022
2022