Found 2670 publications. Showing page 16 of 267:
Monitoring aerosol optical depth during the Arctic night: Instrument development and first results
Moon-photometric measurements were made at two locations in the Arctic during winter nights using two different modified Sun photometers; a Carter Scott SP02 and a Precision Filter Radiometer (PFR) developed at PMOD/WRC. Values of aerosol optical depth (AOD) were derived from spectral irradiance measurements made at four wavelengths for each of the devices. The SP02 was located near Barrow, Alaska and recorded data from November 2012 to March 2013, spanning five lunar cycles, while the PFR was deployed to Ny-Ålesund, Svalbard each winter from February 2014 to February 2019 for a total of 56 measurement periods. A methodology was developed to process the raw data, involving calibration of the instruments and normalizing measured spectral irradiance values in accordance with site-specific determinations of the extraterrestrial atmospheric irradiance (ETI) as Moon phase cycled. Uncertainties of the derived AOD values were also evaluated and found to be in the range, 0.006–0.030, depending on wavelength and which device was evaluated.
The magnitudes of AOD determined for the two sites were in general agreement with those reported in the literature for sunlit periods just before and after the dark periods of Arctic night. Those for the PFR were also compared with data obtained using star photometers and a Cimel CE318-T, recently deployed to Ny-Ålesund, showing that Moon photometry is viable as a means to monitor AOD during the Arctic night. Such data are valuable for more complete assessments of the role aerosols play in modulating climate, the validation of AOD derived using various remote sensing techniques, and applications related to climate modeling.
2024
Toward Standardization of a Lung New Approach Model for Toxicity Testing of Nanomaterials
This study represents an attempt toward the standardization of pulmonary NAMs and the development of a novel approach for toxicity testing of nanomaterials. Laboratory comparisons are challenging yet essential for identifying existing limitations and proposing potential solutions. Lung cells cultivated and exposed at the air-liquid interface (ALI) more accurately represent the physiology of human lungs and pulmonary exposure scenarios than submerged cell and exposure models. A triculture cell model system was used, consisting of human A549 lung epithelial cells and differentiated THP-1 macrophages on the apical side, with EA.hy926 endothelial cells on the basolateral side. The cells were exposed to silver nanoparticles NM-300K for 24 h. The model used here showed to be applicable for assessing the hazards of nanomaterials and chemicals, albeit with some limitations. Cellular viability was measured using the alamarBlue assay, DNA damage was assessed with the enzyme-modified comet assay, and the expression of 40 genes related to cell viability, inflammation, and DNA damage response was evaluated through RT2 gene expression profiling. Despite harmonized protocols used in the two independent laboratories, however, some methodological challenges could affect the results, including sensitivity and reproducibility of the model.
2024
Design of multi-luminescent silica-based nanoparticles for the detection of liquid organic compounds
Tracer testing in reservoir formations is utilised to determine residual oil saturation as part of optimum hydrocarbon production. Here, we present a novel detection method of liquid organic compounds by monodisperse SiO2 nanoparticles (NPs) containing two luminophores, a EuIII:EDTA complex and a newly synthesised fluorophore based on the organic boron-dipyrromethene (BODIPY)-moiety. The particles exhibited stable EuIII PL emission intensity with a long lifetime in aqueous dispersion. The fluorescence of the BODIPY was also preserved in the aqueous environment. The ratiometric PL detection technique was demonstrated by using toluene and 1-octanol as model compounds of crude oil. The optimal synthesis conditions were found to give NPs with a diameter of ~100 nm, which is suitable for transport through porous oil reservoir structures. The cytotoxicity of the NPs was confirmed to be very low for human lung cell and fish cell lines. These findings demonstrate the potential of the NPs to replace the hazardous chemicals used to estimate the residual oil saturation. Moreover, the ratiometric PL detection technique is anticipated to be of benefit in other fields, such as biotechnology, medical diagnostics, and environmental monitoring, where a reliable and safe detection of a liquid organic phase is needed.
2024
This study investigates the impact of meteorological variations on the long-term patterns of PM2.5 in Delhi from 2007 to 2022 using the AirGAM 2022r1 model. Generalized Additive Modeling was employed to analyze meteorology-adjusted (removing the influence of inter-annual variations in meteorology) and unadjusted trends (trends without considering meteorology) while addressing auto-correlation. PM2.5 levels showed a modest decline of 14 μg m−3 unadjusted and 18 μg m−3 meteorology-adjusted over the study period. Meteorological conditions and time factors significantly influenced trends. Temperature, wind speed, wind direction, humidity, boundary layer height, medium-height cloud cover, precipitation, and time variables including day-of-week, day-of-year, and overall time, were used as GAM model inputs. The model accounted for 55% of PM2.5 variability (adjusted R-squared = 0.55). Day-of-week and medium-height cloud cover were non-significant, while other covariates were significant (p
2024
2024
Data fusion for enhancing urban air quality modeling using large-scale citizen science data
Rapid urbanization has led to many environmental issues, including poor air quality. With urbanization set to continue, there is an urgent need to mitigate air pollution and minimize its adverse health impacts. This study aims to advance urban air quality management by integrating a dispersion model output with large-scale citizen science data, collected over a 4-week period by 642 participants in Cork City, Ireland. The dispersion model enabled the identification of major sources of NO2 air pollution while also addressing gaps in regulatory monitoring efforts. Integrating the diffusion tube data with the dispersion model output, we developed a data fusion model that captured localized fluctuations in air quality, with increases of up to 22μg/m3 observed at major road intersections. The data fusion model provided a more accurate representation of NO2 concentrations, with estimates within 1.3μg/m3 of the regulatory monitoring measurement at an urban traffic location, an improvement of 11.7μg/m3 from the priori dispersion model. This enhanced accuracy enabled a more precise assessment of the population exposure to air pollution. The data fusion model showed a higher population exposure to NO2 compared to the dispersion model, providing valuable insights that can inform environmental health policies aimed at safeguarding public health.
2024
Two-Stage Feature Engineering to Predict Air Pollutants in Urban Areas
Air pollution is a global challenge to human health and the ecological environment. Identifying the relationship among pollutants, their fundamental sources and detrimental effects on health and mental well-being is critical in order to implement appropriate countermeasures. The way forward to address this issue and assess air quality is through accurate air pollution prediction. Such prediction can subsequently assist governing bodies in making prompt, evidence-based decisions and prevent further harm to our urban environment, public health, and climate, all of which co-benefit our economy. In this study, the main objective is to explore the strength of features and proposed a two stage feature engineering approach, which fuses the advantage of influential factors along with the decomposition approach and generates an optimum feature combination for five major pollutants including Nitrogen Dioxide (NO 2 ), Ozone (O 3 ), Sulphur Dioxide (SO 2 ), and Particulate Matter (PM2.5, and PM10). The experiments are conducted using a dataset from 2015 to 2020 which is publicly available and is collected from Belfast-based air quality monitoring stations in Northern Ireland, UK. In stage-1, using the dataset new features such as trigonometric and statistical features are created to capture their dependency on the target pollutant and generated correlation-inspired best feature combinations to improve forecasting model performance. This is further enhanced in stage-2 by an optimum feature combination which is an integration of stage-1 and Variational Mode Decomposition (VMD) based features. This study employed a simplified Long Short Term Memory (LSTM) neural network and proposed a single-step forecasting model to predict multivariate time series data. Three performance indicators are used to evaluate the effectiveness of forecasting model: (a) root mean square error (RMSE), (b) mean absolute error (MAE), and (c) R-squared (R 2 ). The results demonstrate the effectiveness of proposed approach with 13% improvement in performance (in terms of R 2 ) and the lowest error scores for both RMSE and MAE.
2024
SuperDARN Radar Wind Observations of Eastward-Propagating Planetary Waves
An array of SuperDARN meteor radars at northern high latitudes was used to investigate the sources and characteristics of eastward-propagating planetary waves (EPWs) at 95 km, with a focus on wintertime. The nine radars provided the daily mean meridional winds and their anomalies over 180 degrees of longitude, and these anomalies were separated into eastward and westward waves using a fast Fourier transform (FFT) method to extract the planetary wave components of zonal wavenumbers 1 and 2. Years when a sudden stratospheric warming event with an elevated stratopause (ES-SSW) occurred during the winter were contrasted with years without such events and composited through superposed epoch analysis. The results show that EPWs are a ubiquitous—and unexpected—feature of meridional wind variability near 95 km. Present even in non-ES-SSW years, they display a regular annual cycle peaking in January or February, depending on the zonal wavenumber. In years when an ES-SSW occurred, the EPWs were highly variable but enhanced before and after the onset.
2024
Extracellular Vesicles as Next-Generation Diagnostics and Advanced Therapy Medicinal Products
Extracellular vesicles (EVs) hold great promise for clinical application as new diagnostic and therapeutic modalities. This paper describes major GMP-based upstream and downstream manufacturing processes for EV large-scale production, also focusing on post-processing technologies such as surface bioengineering and uploading studies to yield novel EV-based diagnostics and advanced therapy medicinal products. This paper also focuses on the quality, safety, and efficacy issues of the bioengineered EV drug candidates before first-in-human studies. Because clinical trials involving extracellular vesicles are on the global rise, this paper encompasses different clinical studies registered on clinical-trial register platforms, with varying levels of advancement, highlighting the growing interest in EV-related clinical programs. Navigating the regulatory affairs of EVs poses real challenges, and obtaining marketing authorization for EV-based medicines remains complex due to the lack of specific regulatory guidelines for such novel products. This paper discusses the state-of-the-art regulatory knowledge to date on EV-based diagnostics and medicinal products, highlighting further research and global regulatory needs for the safe and reliable implementation of bioengineered EVs as diagnostic and therapeutic tools in clinical settings. Post-marketing pharmacovigilance for EV-based medicinal products is also presented, mainly addressing such topics as risk assessment and risk management.
2024
FLEXPART version 11: improved accuracy, efficiency, and flexibility
Numerical methods and simulation codes are essential for the advancement of our understanding of complex atmospheric processes. As technology and computer hardware continue to evolve, the development of sophisticated code is vital for accurate and efficient simulations. In this paper, we present the recent advancements made in the FLEXible PARTicle dispersion model (FLEXPART), a Lagrangian particle dispersion model, which has been used in a wide range of atmospheric transport studies over the past 3 decades, extending from tracing radionuclides from the Fukushima nuclear disaster, to inverse modelling of greenhouse gases, and to the study of atmospheric moisture cycles.
This version of FLEXPART includes notable improvements in accuracy and computational efficiency. (1) By leveraging the native vertical coordinates of European Centre for Medium Range Weather Forecasts (ECMWF) Integrated Forecasting System (IFS) instead of interpolating to terrain-following coordinates, we achieved an improvement in trajectory accuracy, leading to a ∼8 %–10 % reduction in conservation errors for quasi-conservative quantities like potential vorticity. (2) The shape of aerosol particles is now accounted for in the gravitational settling and dry-deposition calculation, increasing the simulation accuracy for non-spherical aerosol particles such as microplastic fibres. (3) Wet deposition has been improved by the introduction of a new below-cloud scheme, by a new cloud identification scheme, and by improving the interpolation of precipitation. (4) Functionality from a separate version of FLEXPART, the FLEXPART CTM (chemical transport model), is implemented, which includes linear chemical reactions. Additionally, the incorporation of Open Multi-Processing parallelisation makes the model better suited for handling large input data. Furthermore, we introduced novel methods for the input and output of particle properties and distributions. Users now have the option to run FLEXPART with more flexible particle input data, providing greater adaptability for specific research scenarios (e.g. effective backward simulations corresponding to satellite retrievals). Finally, a new user manual (https://flexpart.img.univie.ac.at/docs/, last access: 11 September 2024) and restructuring of the source code into modules will serve as a basis for further development.
2024