Found 2713 publications. Showing page 31 of 272:
We conducted a theoretical analysis of the relationship between red-to-blue (RBR) color intensities and aerosol optical properties. RBR values are obtained by radiative transfer simulations of diffuse sky radiances. Changes in atmospheric aerosol concentration (parametrized by aerosol optical depth, AOD), particle’s size distribution (parametrized by Ångström exponent, AE) and aerosols’ scattering (parametrized by single scattering albedo—SSA) lead to variability in sky radiances and, thus, affect the RBR ratio. RBR is highly sensitive to AOD as high aerosol load in the atmosphere causes high RBR. AE seems to strongly affect the RBR, while SSA effect the RBR, but not to such a great extent.
2023
Rapid identification of in vitro cell toxicity using an electrochemical membrane screening platform
This study compares the performance and output of an electrochemical phospholipid membrane platform against respective in vitro cell-based toxicity testing methods using three toxicants of different biological action (chlorpromazine (CPZ), colchicine (COL) and methyl methanesulphonate (MMS)). Human cell lines from seven different tissues (lung, liver, kidney, placenta, intestine, immune system) were used to validate this physicochemical testing system. For the cell-based systems, the effective concentration at 50 % cell death (EC50) values are calculated. For the membrane sensor, a limit of detection (LoD) value was extracted as a quantitative parameter describing the minimum concentration of toxicant which significantly affects the structure of the phospholipid sensor membrane layer. LoD values were found to align well with the EC50 values when acute cell viability was used as an end-point and showed a similar toxicity ranking of the tested toxicants. Using the colony forming efficiency (CFE) or DNA damage as end-point, a different order of toxicity ranking was observed. The results of this study showed that the electrochemical membrane sensor generates a parameter relating to biomembrane damage, which is the predominant factor in decreasing cell viability when in vitro models are acutely exposed to toxicants. These results lead the way to using electrochemical membrane-based sensors for rapid relevant preliminary toxicity screens.
2023
An Unprecedented Arctic Ozone Depletion Event During Spring 2020 and Its Impacts Across Europe
The response of the ozone column across Europe to the extreme 2020 Arctic ozone depletion was examined by analyzing ground-based observations at 38 European stations. The ozone decrease at the northernmost site, Ny-Ålesund (79°N) was about 43% with respect to a climatology of more than 30 years. The magnitude of the decrease declined by about 0.7% deg−1 moving south to reach nearly 15% at 40°N. In addition, it was found that the variations of the ozone column at each of the selected stations in March-May were similar to those observed at Ny-Ålesund but with a delay increasing to about 20 days at mid-latitudes with a gradient of approximately 0.5 days deg−1. The distributions of reconstructed ozone column anomalies over a sector covering a large European area show decreasing ozone that started from the north at the beginning of April 2020 and spread south. Such behavior was shown to be similar to that observed after the Arctic ozone depletion in 2011. Stratospheric dynamical patterns in March–May 2011 and during 2020 suggested that the migration of ozone-poor air masses from polar areas to the south after the vortex breakup caused the observed ozone responses. A brief survey of the ozone mass mixing ratios at three stratospheric levels showed the exceptional strength of the 2020 episode. Despite the stronger and longer-lasting Arctic ozone loss in 2020, the analysis in this work indicates a similar ozone response at latitudes below 50°N to both 2011 and 2020 phenomena.
2023
Low-cost sensors (LCSs) for particulate matter (PM) concentrations have attracted the interest of researchers, supplementing their efforts to quantify PM in higher spatiotemporal resolution. The precision of PM mass concentration measurements from PMS 5003 sensors has been widely documented, though limited information is available regarding their size selectivity and number concentration measurement accuracy. In this work, PMS 5003 sensors, along with a Federal Referral Methods (FRM) sampler (Grimm spectrometer), were deployed across three sites with different atmospheric profiles, an urban (Germanou) and a background (UPat) site in Patras (Greece), and a semi-arid site in Almería (Spain, PSA). The LCSs particle number concentration measurements were investigated for different size bins. Findings for particles with diameter between 0.3 and 10 μm suggest that particle size significantly affected the LCSs’ response. The LCSs could accurately detect number concentrations for particles smaller than 1 μm in the urban (R2 = 0.9) and background sites (R2 = 0.92), while a modest correlation was found with the reference instrument in the semi-arid area (R2 = 0.69). However, their performance was rather poor (R2
2023
EnvCul (https://envcul.nilu.no/) modelling was performed of condition changes of painted wooden panels and related conservation cost in indoor climate and object response scenarios in two Norwegian Medieval stone churches: Kinn (mean relative humidity = 79%) on the humid west coast, and Ringsaker (mean RH = 49%) in the drier eastern part of the country. It was found that, hypothetical, building measures in Kinn, and conservation heating measures in Ringsaker, to approach an indoor RH of about 65% in the two churches, could probably increase conservation intervals with 20–100%, and correspondingly reduce conservation costs between 10% and 50%. This is in reasonable agreement with an available report of observed conservation requirements in differently heated Norwegian churches. A situation between a linear and accelerating development of the deterioration of the painted wood on approaching a new conservation intervention gave the best correspondence to the observed values. The large modelling uncertainty was mainly due to lacking observations of the deterioration development, but also lacking understanding of the complex mechanisms and phases of the environmental dose-deterioration response of painting conservation treatments.
2023
The 2021 East Asia sandstorm began from the Eastern Gobi desert steppe in Mongolia on March 14, and later spread to northern China and the Korean Peninsula. It was the biggest sandstorm to hit China in a decade, causing severe air pollution and a significant threat to human health. Capturing and predicting such extreme events is critical for society. The Lagrangian particle dispersion model FLEXPART and the associated dust emission model FLEXDUST have been recently developed and applied to simulate global dust cycles. However, how well the model captures Asian dust storm events remains to be explored. In this study, we applied FLEXPART to simulate the recent 2021 East Asia sandstorm, and evaluated its performance comparing with observation and observation-constrained reanalysis datasets, such as the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) and CAMS global atmospheric composition forecasts (CAMS-F). We found that the default setting of FLEXDUST substantially underestimates the strength of dust emission and FLEXPART modelled dust concentration in this storm compared to that in MERRA-2 and CAMS-F. An improvement of the parametrization of bare soil fraction, topographical scaling, threshold friction velocity and vertical dust flux scheme based on Kok et al. (Atmospheric Chemistry and Physics, 2014, 14, 13023–13041) in FLEXDUST can reproduce the strength and spatio-temporal pattern of the dust storm comparable to MERRA-2 and CAMS-F. However, it still underestimates the observed spike of dust concentration during the dust storm event over northern China, and requires further improvement in the future. The improved FLEXDUST and FLEXPART perform better than MERRA-2 and CAMS-F in capturing the observed particle size distribution of dust aerosols, highlighting the importance of using more dust size bins and size-dependent parameterization for dust emission, and dry and wet deposition schemes for modelling the Asian dust cycle and its climatic feedbacks.
2023
To estimate the effect of vegetation stress and changes in biogenic volatile organic compound (BVOC) emissions on urban ozone (O3) levels we perform a systematic, observation-based analysis of the relationship between formaldehyde (HCHO) mixing ratios, meteorological parameters, measurement-based drought indicators and O3 over the central European city of Vienna, Austria. In addition, numerical models SURface EXternalisée (SURFEX), Model of Emissions of Gases and Aerosols from Nature (MEGAN) Vers.2.1 and 3 and MOdèle de Chimie A Grande Echelle (MOCAGE) are combined to estimate the soil moisture, the spatial distribution and drought response of isoprene emissions, and the resulting distribution of HCHO in the atmosphere. To analyse the effect of drought during spring and summer we contrast observations during dry and reference years. Our results show that the observed HCHO can be explained using the simulated isoprene emissions as well as observed and simulated vegetation drought responses. HCHO mixing ratios differ strongly between dry and reference seasons. Spring-time precipitation deficits facilitate reduced HCHO mixing ratios due to delayed and weakened plant growth. In consequence also O3 burdens are lowered due to reduced BVOC precursor emissions. These reductions occur despite radiation levels being higher than during the reference year, illustrating the strong potential of spring-time BVOC emissions to modulate urban O3 burdens. Conversely, during summer elevated O3 levels occur during local drought conditions. These are driven by advected isoprene originating from nearby forest areas, which are not affected by drought. Our results regarding elevated summer-time O3 burdens under vegetation heat and drought stress are in good agreement with previous work.
2023
Mapping potential conflicts between global agriculture and terrestrial conservation
Demand for food products, often from international trade, has brought agricultural land use into direct competition with biodiversity. Where these potential conflicts occur and which consumers are responsible is poorly understood. By combining conservation priority (CP) maps with agricultural trade data, we estimate current potential conservation risk hotspots driven by 197 countries across 48 agricultural products. Globally, a third of agricultural production occurs in sites of high CP (CP > 0.75, max = 1.0). While cattle, maize, rice, and soybean pose the greatest threat to very high-CP sites, other low-conservation risk products (e.g., sugar beet, pearl millet, and sunflower) currently are less likely to be grown in sites of agriculture–conservation conflict. Our analysis suggests that a commodity can cause dissimilar conservation threats in different production regions. Accordingly, some of the conservation risks posed by different countries depend on their demand and sourcing patterns of agricultural commodities. Our spatial analyses identify potential hotspots of competition between agriculture and high-conservation value sites (i.e., 0.5° resolution, or ~367 to 3,077km2, grid cells containing both agriculture and high-biodiversity priority habitat), thereby providing additional information that could help prioritize conservation activities and safeguard biodiversity in individual countries and globally. A web-based GIS tool at https://agriculture.spatialfootprint.com/biodiversity/ systematically visualizes the results of our analyses.
2023
Sheath formation time for spherical Langmuir probes
The formation time of the surrounding sheath of Langmuir probes in an ionospheric plasma has been studied to better understand the constraints this puts on the sampling frequency of a probe. A fully kinetic three-dimensional particle-in-cell model is used to simulate the temporal effects in the electron saturation region as the sheath forms. The stability of the probe current and the stability of the ion and electron density in the vicinity of the probe have been used to evaluate when the sheath was formed. Simulated results were compared with theoretical models and are in good agreement with the theoretical results. This shows that theoretical models can be used as guidance to estimate the formation time and to determine the sampling rate for a swept bias Langmuir system. Our results also show that the formation time is less affected by the plasma temperature and bias voltage as we move into the thick sheath regime, and will instead be determined by the plasma density. The presented results also show that applying a step function to the probe could be used to characterise ions species composition, or to estimate the ion density.
2023