Found 2675 publications. Showing page 40 of 268:
The influence of photochemistry on outdoor to indoor NO2 in some European museums
This paper reports 1 year of monthly average NO2 indoor to outdoor (I/O) concentrations measured in 10 European museums, and a simple steady-state box model that explains the annual variation. The measurements were performed in the EU FP5 project Master (EVK-CT-2002-00093). The work provides extensive documentation of the annual variation of NO2 I/O concentration ratios, with ratios above unity in the summer, in situations with no indoor emissions of NO2. The modelling included the most relevant production and removal processes of NO2 and showed that the outdoor photolysis was the probable main explanation of the annual trends in the NO2 I/O concentration ratios.
2022
Aerosol distributions have a potentially large influence on climate-relevant cloud properties but can be difficult to observe over the Arctic given pervasive cloudiness, long polar nights, data paucity over remote regions, and periodic diamond dust events that satellites can misclassify as aerosol. We compared Arctic 2008–2015 mineral dust and combustion aerosol distributions from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite, the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) reanalysis products, and the FLEXible PARTicle (FLEXPART) dispersion model. Based on coincident, seasonal Atmospheric Infrared Sounder (AIRS) Arctic satellite meteorological data, diamond dust may occur up to 60 % of the time in winter, but it hardly ever occurs in summer. In its absence, MERRA-2 and FLEXPART each predict the vertical and horizontal distribution of large-scale patterns in combustion aerosols with relatively high confidence (Kendall tau rank correlation > 0.6), although a sizable amount of variability is still unaccounted for. They do the same for dust, except in conditions conducive to diamond dust formation where CALIPSO is likely misclassifying diamond dust as mineral dust and near the surface...
2022
Machine Learning-Based Digital Twin for Predictive Modeling in Wind Turbines
Wind turbines are one of the primary sources of renewable energy, which leads to a sustainable and efficient energy solution. It does not release any carbon emissions to pollute our planet. The wind farms monitoring and power generation prediction is a complex problem due to the unpredictability of wind speed. Consequently, it limits the decision power of the management team to plan the energy consumption in an effective way. Our proposed model solves this challenge by utilizing a 5G-Next Generation-Radio Access Network (5G-NG-RAN) assisted cloud-based digital twins’ framework to virtually monitor wind turbines and form a predictive model to forecast wind speed and predict the generated power. The developed model is based on Microsoft Azure digital twins infrastructure as a 5-dimensional digital twins platform. The predictive modeling is based on a deep learning approach, temporal convolution network (TCN) followed by a non-parametric k-nearest neighbor (kNN) regression. Predictive modeling has two components. First, it processes the univariate time series data of wind to predict its speed. Secondly, it estimates the power generation for each quarter of the year ranges from one week to a whole month (i.e., medium-term prediction) To evaluate the framework the experiments are performed on onshore wind turbines publicly available datasets. The obtained results confirm the applicability of the proposed framework. Furthermore, the comparative analysis with the existing classical prediction models shows that our designed approach obtained better results. The model can assist the management team to monitor the wind farms remotely as well as estimate the power generation in advance.
2022
Health impacts of PM
Residential wood combustion (RWC) is one of the largest sources of fine particles (PM2.5) in the Nordic cities. The current study aims to calculate the related health effects in four studied city areas in Sweden, Finland, Norway, and Denmark.
2022
Background: Positive associations have been reported between persistent organic pollutants (POPs) and type 2 diabetes mellitus (T2DM); however, causality has not been established. Over the last decades, environmental exposure to legacy POPs has decreased, complicating epidemiological studies. In addition, physiological risk factors for T2DM may also influence POP concentrations, contributing to a complex network of factors that could impact associations with T2DM. Longitudinal studies on this topic are lacking, and few have assessed prospective and cross-sectional associations between repeated POP measurements and T2DM in the same individuals, which may shed light on causality.<p> <p>Objectives: To compare longitudinal trends in concentrations of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in T2DM cases and controls, and to examine prospective and cross-sectional associations between PCBs, OCPs and T2DM at different time-points before and after T2DM diagnosis in cases. <p>Methods: We conducted a longitudinal, nested case-control study (1986–2016) of 116 T2DM cases and 139 controls from the Tromsø Study. All participants had three blood samples collected before T2DM diagnosis in cases, and up to two samples thereafter. We used linear mixed-effect models to assess temporal changes of POPs within and between T2DM cases and controls, and logistic regression models to investigate the associations between different POPs and T2DM at different time-points. <p>Results: PCBs, trans-nonachlor, cis-nonachlor, oxychlordane, cis-heptachlor epoxide, p,p’-DDE, and p,p’-DDT declined more slowly in cases than controls, whereas β-HCH and HCB declined similarly in both groups. Most POPs showed positive associations between both pre- and post-diagnostic concentrations and T2DM, though effect estimates were imprecise. These associations were most consistent for cis-heptachlor epoxide. <p>Discussion: The observed positive associations between certain POPs and T2DM may be because of higher POP concentrations within prospective T2DM cases, due to slower temporal declines as compared to controls.
2022
Organic aerosol (OA) is a key component of total submicron particulate matter (PM1), and comprehensive knowledge of OA sources across Europe is crucial to mitigate PM1 levels. Europe has a well-established air quality research infrastructure from which yearlong datasets using 21 aerosol chemical speciation monitors (ACSMs) and 1 aerosol mass spectrometer (AMS) were gathered during 2013–2019. It includes 9 non-urban and 13 urban sites. This study developed a state-of-the-art source apportionment protocol to analyse long-term OA mass spectrum data by applying the most advanced source apportionment strategies (i.e., rolling PMF, ME-2, and bootstrap). This harmonised protocol was followed strictly for all 22 datasets, making the source apportionment results more comparable. In addition, it enables quantification of the most common OA components such as hydrocarbon-like OA (HOA), biomass burning OA (BBOA), cooking-like OA (COA), more oxidised-oxygenated OA (MO-OOA), and less oxidised-oxygenated OA (LO-OOA). Other components such as coal combustion OA (CCOA), solid fuel OA (SFOA: mainly mixture of coal and peat combustion), cigarette smoke OA (CSOA), sea salt (mostly inorganic but part of the OA mass spectrum), coffee OA, and ship industry OA could also be separated at a few specific sites. Oxygenated OA (OOA) components make up most of the submicron OA mass (average = 71.1%, range from 43.7 to 100%). Solid fuel combustion-related OA components (i.e., BBOA, CCOA, and SFOA) are still considerable with in total 16.0% yearly contribution to the OA, yet mainly during winter months (21.4%). Overall, this comprehensive protocol works effectively across all sites governed by different sources and generates robust and consistent source apportionment results. Our work presents a comprehensive overview of OA sources in Europe with a unique combination of high time resolution (30–240 min) and long-term data coverage (9–36 months), providing essential information to improve/validate air quality, health impact, and climate models.
2022
To cope with the high number of nanomaterials manufactured, it is essential to develop high-throughput methods for in vitro toxicity screening. At the same time, the issue with interference of the nanomaterial (NM) with the read-out or the reagent of the assay needs to be addressed to avoid biased results. Thus, validated label-free methods are urgently needed for hazard identification of NMs to avoid unintended adverse effects on human health. The colony forming efficiency (CFE) assay is a label- and interference-free method for quantification of cytotoxicity by cell survival and colony forming efficiency by CFE formation. The CFE has shown to be compatible with toxicity testing of NMs. Here we present an optimized protocol for a higher-throughput set up.
2022
Temporal trends of industrial organic contaminants can show how environmental burdens respond to changes in production, regulation, and other anthropogenic and environmental factors. Numerous studies have documented such trends from the Northern Hemisphere, while there is very limited data in the literature from sub-Saharan Africa. We hypothesized that the temporal trends of legacy and contemporary industrial contaminants in sub-Saharan Africa could greatly differ from the regions in which many of these chemicals were initially produced and more extensively used. For this purpose, a dated sediment core covering six decades from a floodplain system in urban Dar es Salaam, Tanzania, was analysed. The samples were analysed for selected legacy persistent organic pollutants (POPs) [polychlorinated biphenyls (PCBs) and polybrominated biphenyl ethers (PBDEs)] and chemicals of emerging concern (CECs) [alternative brominated flame retardants (aBFRs), chlorinated paraffins (CPs), and dechloranes]. All groups of chemicals showed a steep increase in concentrations towards the uppermost sediment layers reflecting the more recent years. Concentrations of the individual compound groups in surface sediment were found in the order CPs >> aBFRs ∼ ∑25PBDEs > dechloranes ∼ ∑32PCBs. Time trends for the individual compounds and compound groups differed, with ∑32PCBs showing presence in sediments since at least the early 1960s, while some CECs first occurred in sediments corresponding to the last decade. Investigations into potential drivers for the observed trends showed that socioeconomic factors related to growth in population, economy, and waste generation have contributed to increasing concentrations of PBDEs, aBFRs, CPs, and Dechlorane Plus. Further monitoring of temporal trends of industrial organic contaminants in urban areas in the Global South is recommended.
2022
Hazard identification and safety assessment of the huge variety of nanomaterials (NMs), calls for robust and validated toxicity screening tests in combination with cheminformatics approaches to identify factors that can drive toxicity. Cytotoxicity and genotoxicity of seventeen JRC repository NMs, derived from titanium dioxide, zinc oxide, silver and silica, were tested in vitro using human lung alveolar epithelial cells A549. Cytotoxicity was assessed with the AlamarBlue (AB) and colony forming efficiency (CFE) assays, and genotoxicity by the enzyme-linked version of the comet assay. Nanoparticle tracking analysis (NTA) was used to measure size of the NMs in stock and in cell culture medium at different time points. Categorization and ranking of cytotoxic and genotoxic potential were performed (EU-NanoREG2 project approach). Descriptors for prediction of NMs toxicity were identified by quantitative structure-activity relationship (QSAR) analysis. Our results showed that ZnO NMs (NM-110 and NM-111), and Ag NMs (NM-300K and NM-302) were cytotoxic, while the TiO2 and SiO2 NMs were non-cytotoxic. Regarding genotoxicity, TiO2 NM-100, ZnO NM-110, SiO2 NM-203 and Ag NM-300K were categorized as positive. Cheminformatics modeling identified electron properties and overall chemical reactivity as important descriptors for cytotoxic potential, HOMO-LUMO energy parameter, ionization potential, pristine size for the NMs´ genotoxic potential, and presence of surface coating as descriptor for induction of DNA oxidized base lesions.
2022