Found 2647 publications. Showing page 46 of 265:
Tackling Data Quality When Using Low-Cost Air Quality Sensors in Citizen Science Projects
Using low-cost air quality sensors (LCS) in citizen science projects opens many possibilities. LCS can provide an opportunity for the citizens to collect and contribute with their own air quality data. However, low data quality is often an issue when using LCS and with it a risk of unrealistic expectations of a higher degree of empowerment than what is possible. If the data quality and intended use of the data is not harmonized, conclusions may be drawn on the wrong basis and data can be rendered unusable. Ensuring high data quality is demanding in terms of labor and resources. The expertise, sensor performance assessment, post-processing, as well as the general workload required will depend strongly on the purpose and intended use of the air quality data. It is therefore a balancing act to ensure that the data quality is high enough for the specific purpose, while minimizing the validation effort. The aim of this perspective paper is to increase awareness of data quality issues and provide strategies to minimizing labor intensity and expenses while maintaining adequate QA/QC for robust applications of LCS in citizen science projects. We believe that air quality measurements performed by citizens can be better utilized with increased awareness about data quality and measurement requirements, in combination with improved metadata collection. Well-documented metadata can not only increase the value and usefulness for the actors collecting the data, but it also the foundation for assessment of potential integration of the data collected by citizens in a broader perspective.
Frontiers Media S.A.
2021
There are large knowledge gaps concerning environmental levels and fate of many organic pollutants, particularly for chemicals of emerging concern in tropical regions of the Global South. In this study, we investigated the levels of chlorinated paraffins (CPs) and dechloranes in air and soil in rural, suburban, and urban regions in and around Dar es Salaam, Tanzania. Samples were also collected near the city's main municipal waste dumpsite and an electronic waste (e-waste) handling facility. In passive air samples, short chain CPs (SCCPs) dominated, with an average estimated concentration of 22 ng/m3, while medium chain CPs (MCCPs) had an average estimated concentration of 9 ng/m3. The average estimated air concentration of ∑dechloranes (Dechlorane Plus (DP) + Dechlorane 602 + Dechlorane 603) was three to four orders of magnitudes lower, 2 pg/m3. In soil samples, MCCPs dominated with an average concentration of 640 ng/g dw, followed by SCCPs with an average concentration of 330 ng/g dw, and ∑dechloranes with an average concentration of 0.9 ng/g dw. In both air and soil, DP was the dominating dechlorane compound. Urban pulses were observed for CPs and dechloranes in air and soil. CPs were in addition found in elevated levels at the municipal waste dumpsite and the e-waste handling facility, while DPs were found in elevated levels at the e-waste handling facility. This suggests that waste handling sites represent important emission sources for these pollutants. Investigations into seasonal trends and environmental fate of CPs and dechloranes showed that monsoonal rain patterns play a major role in governing air concentrations and mobility, particularly for the less volatile MCCPs and dechloranes. This study is the first to report levels of CPs in air from sub-Saharan Africa, and DP, Dechlorane 602, and Dechlorane 603 in soil from sub-Saharan Africa.
Springer
2021
Emissions of Tetrafluoromethane (CF4) and Hexafluoroethane (C2F6) From East Asia: 2008 to 2019
The perfluorocarbons (PFCs), tetrafluoromethane (CF4) and hexafluoroethane (C2F6), are potent greenhouse gases with very long atmospheric lifetimes. They are emitted almost entirely from industrial sources, including the aluminum and rare earth metal smelting industries that emit them as by-products, and the semiconductor and flat panel display manufacturing industries that use them and vent unutilized amounts to the atmosphere. Despite extensive industrial efforts to quantify and curb these emissions, “top-down” PFC emission estimates derived from atmospheric measurements continue to rise and are significantly greater than reported process- and inventory-based “bottom-up” emissions. In this study, we estimate emissions of CF4 and C2F6 from East Asia, where PFC emitting industries are heavily concentrated, using a top-down approach (a Bayesian inversion) with high-frequency atmospheric measurements at Gosan (Jeju Island, South Korea) for 2008–2019. We also compile and analyze the available bottom-up CF4 and C2F6 emissions in East Asia from industrial and government reports. Our results suggest that the observed increases in global PFC emissions since 2015 are driven primarily by China's aluminum industry, with significant contributions from Japan's and Korea's semiconductor industry. Our analysis suggests that Chinese emissions occur predominantly from the aluminum industry, although their emissions per production ratio may be improving. Our results for Japan and Korea find significant discrepancies between top-down and bottom-up emissions estimates, suggesting that the effectiveness of emission reduction systems (abatement) used in their semiconductor industries may be overestimated. Overall, our top-down results for East Asia contribute significantly to reducing the gap in the global PFC emission budgets.
American Geophysical Union (AGU)
2021
2021
Hemispheric black carbon increase after the 13th-century Māori arrival in New Zealand
New Zealand was among the last habitable places on earth to be colonized by humans. Charcoal records indicate that wildfires were rare prior to colonization and widespread following the 13th- to 14th-century Māori settlement, but the precise timing and magnitude of associated biomass-burning emissions are unknown, as are effects on light-absorbing black carbon aerosol concentrations over the pristine Southern Ocean and Antarctica. Here we used an array of well-dated Antarctic ice-core records to show that while black carbon deposition rates were stable over continental Antarctica during the past two millennia, they were approximately threefold higher over the northern Antarctic Peninsula during the past 700 years. Aerosol modelling demonstrates that the observed deposition could result only from increased emissions poleward of 40° S—implicating fires in Tasmania, New Zealand and Patagonia—but only New Zealand palaeofire records indicate coincident increases. Rapid deposition increases started in 1297 (±30 s.d.) in the northern Antarctic Peninsula, consistent with the late 13th-century Māori settlement and New Zealand black carbon emissions of 36 (±21 2 s.d.) Gg y−1 during peak deposition in the 16th century. While charcoal and pollen records suggest earlier, climate-modulated burning in Tasmania and southern Patagonia, deposition in Antarctica shows that black carbon emissions from burning in New Zealand dwarfed other preindustrial emissions in these regions during the past 2,000 years, providing clear evidence of large-scale environmental effects associated with early human activities across the remote Southern Hemisphere.
2021
The historical (1835–2020) dry deposition of major air pollutants (SO2, NOx, O3 and PM2.5) in the urban background in Oslo, Norway, in a situation that could represent the building facades, was approximated from reported fuel combustion, emission factors, air concentrations since 1960, and dry deposition velocities. The annual accumulated dry deposition (and thus not considering the removal processes) of the pollutants, together, was found to have varied from about 2.3 to 27 g m−2, with the maximum in the 1960s caused by high SO2 emissions from the combustion of fuel oils, and with 1.6 kg m−2 having deposited over all the years. The deposition of PM2.5 was found to have dominated from 1835, have increased to a maximum in 1875 and then slowly decreased. The SO2 deposition decreased to a low value around 1990. The NOx deposition was also at its highest in the 1960s to about 1970, it became the largest from the 1980s, and then showed a clear decrease from about 2010. The O3 deposition was lower in the years of the maximum total and NOx deposition. The dry deposition of O3 and NOx were found to be about similar in 2020, more than two times that of PM2.5 and more than four times that of SO2. The trends of the NOx emissions were found to reflect the relative (1975) and absolute (∼2000) turning points of the environmental Kuznets curves (EKC) that has been suggested for Norway, whereas the trend of the SO2 emissions seems to have “shortcut” this development by the strong regulations in the emissions from 1970 that lead to near simultaneous relative and absolute reductions. The gradual decrease of the PM2.5 emissions from about 1945 seems to correspond with the decrease in combustion energy intensity in the economy as wood was substituted with more energy efficient fuels and then with the continued reduction in the wood burning.
Elsevier
2021
Black Carbon (BC) aerosol is a major climate forcer in the Arctic. Here, we present 15 years (2001–2015) of surface observations of the aerosol absorption coefficient babs (corresponding to Equivalent BC), obtained at the Zeppelin Observatory, Ny Ålesund, Svalbard, coupled with backward transport modeling with Flexpart in order to calculate the Potential Source Contribution Function (PSCF) for BC. The observed long-term variability superimposed on a strong annual cycle is studied as a function of large-scale circulation patterns represented by monthly index values for the North Atlantic Oscillation (NAO) and the Scandinavian pattern (SCAN). We find a 35% increase of babs values at Zeppelin during the SCAN+ phase in the winter half-year compared to the SCAN+ phase but no significant difference in babs values between the NAO index phases. Both NAO and SCAN induce significant regional variability on the areas of origin of babs, mainly Siberia, Europe, and North America.
American Geophysical Union (AGU)
2021
The role of nature-based solutions for improving environmental quality, health and well-being
Nature-based solutions (NbS) have been positioned and implemented in urban areas as solutions for enhancing urban resilience in the face of a wide range of urban challenges. However, there is a lack of recommendations of optimal NbS and appropriate typologies fitting to different contexts and urban design. The analytical frameworks for NbS implementation and impact evaluation, that integrate NbS into local policy frameworks, socio-economic transition pathways, and spatial planning, remain fragmented. In this article, the NbS concept and its related terminologies are first discussed. Second, the types of NbS implemented in Europe are reviewed and their benefits over time are explored, prior to categorizing them and highlighting the key methods, criteria, and indicators to identify and assess the NbS’s impacts, co-benefits, and trade-offs. The latter involved a review of the websites of 52 projects and some relevant publications funded by EU Research and Innovation programs and other relevant publications. The results show that there is a shared understanding that the NbS concept encompasses benefits of restoration and rehabilitation of ecosystems, carbon neutrality, improved environmental quality, health and well-being, and evidence for such benefits. This study also shows that most NbS-related projects and activities in Europe use hybrid approaches, with NbS typically developed, tested, or implemented to target specific types of environmental–social–economic challenges. The results of this study indicate that NbS as a holistic concept would be beneficial in the context of climate action and sustainable solutions to enhance ecosystem resilience and adaptive capacity within cities. As such, this article provides a snapshot of the role of NbS in urban sustainability development, a guide to the state-of-the-art, and key messages and recommendations of this rapidly emerging and evolving field.
MDPI
2021
The Monitoring Nitrous Oxide Sources (MIN
The Monitoring Nitrous Oxide Sources (MIN2OS) satellite project aims at monitoring global-scale nitrous oxide (N2O) sources by retrieving N2O surface fluxes from the inversion of space-borne N2O measurements that are sensitive to the lowermost atmospheric layers under favorable conditions. MIN2OS will provide emission estimates of N2O at a horizontal resolution of 1° × 1° on the global scale and 10 × 10 km2 on the regional scale on a weekly to monthly basis depending on the application (e.g., agriculture, national inventories, policy, scientific research). Our novel approach is based on the development of: 1) a space-borne instrument operating in the Thermal InfraRed domain providing, in clear sky conditions, N2O mixing ratio in the lowermost atmosphere (900 hPa) under favorable conditions (summer daytime) over land and under favorable and unfavorable (winter nighttime) conditions over the ocean and 2) an atmospheric inversion framework to estimate N2O surface fluxes from the atmospheric satellite observations. After studying three N2O spectral bands (B1 at 1240–1350 cm−1, B2 at 2150–2260 cm−1 and B3 at 2400–2600 cm−1), a new TIR instrument will be developed, centered at 1250–1330 cm−1, with a resolution of 0.125 cm−1, a Full Width at Half Maximum of 0.25 cm−1 and a swath of 300 km. To optimally constrain the retrieval of N2O vertical profiles, the instrument will be on-board a platform at ~830 km altitude in a sun-synchronous orbit crossing the Equator in descending node at 09:30 local time in synergy with two other platforms (Metop-SG and Sentinel-2 NG) expected to fly in 2031–32 aiming at detecting surface properties, agricultural information on the field scale and vertical profiles of atmospheric constituents and temperature. The lifetime of the MIN2OS project would be 4–5 years to study the interannual variability of N2O surface fluxes. The spectral noise can be decreased by at least a factor of 5 compared to the lowest noise accessible to date with the Infrared Atmospheric Sounding Interferometer-New Generation (IASI-NG) mission. The N2O total error is expected to be less than ~1% (~3 ppbv) along the vertical. The preliminary design of the MIN2OS project results in a small instrument (payload of 90 kg, volume of 1200 × 600 × 300 mm3) with, in addition to the spectrometer, a wide field and 1-km resolution imager for cloud detection. The instruments could be hosted on a small platform, the whole satellite being largely compatible with a dual launch on VEGA-C. The MIN2OS project has been submitted to the European Space Agency Earth Explorer 11 mission ideas.
2021
Reviews and syntheses: Arctic fire regimes and emissions in the 21st century
In recent years, the pan-Arctic region has experienced increasingly extreme fire seasons. Fires in the northern high latitudes are driven by current and future climate change, lightning, fuel conditions, and human activity. In this context, conceptualizing and parameterizing current and future Arctic fire regimes will be important for fire and land management as well as understanding current and predicting future fire emissions. The objectives of this review were driven by policy questions identified by the Arctic Monitoring and Assessment Programme (AMAP) Working Group and posed to its Expert Group on Short-Lived Climate Forcers. This review synthesizes current understanding of the changing Arctic and boreal fire regimes, particularly as fire activity and its response to future climate change in the pan-Arctic have consequences for Arctic Council states aiming to mitigate and adapt to climate change in the north. The conclusions from our synthesis are the following. (1) Current and future Arctic fires, and the adjacent boreal region, are driven by natural (i.e. lightning) and human-caused ignition sources, including fires caused by timber and energy extraction, prescribed burning for landscape management, and tourism activities. Little is published in the scientific literature about cultural burning by Indigenous populations across the pan-Arctic, and questions remain on the source of ignitions above 70∘ N in Arctic Russia. (2) Climate change is expected to make Arctic fires more likely by increasing the likelihood of extreme fire weather, increased lightning activity, and drier vegetative and ground fuel conditions. (3) To some extent, shifting agricultural land use and forest transitions from forest–steppe to steppe, tundra to taiga, and coniferous to deciduous in a warmer climate may increase and decrease open biomass burning, depending on land use in addition to climate-driven biome shifts. However, at the country and landscape scales, these relationships are not well established. (4) Current black carbon and PM2.5 emissions from wildfires above 50 and 65∘ N are larger than emissions from the anthropogenic sectors of residential combustion, transportation, and flaring. Wildfire emissions have increased from 2010 to 2020, particularly above 60∘ N, with 56 % of black carbon emissions above 65∘ N in 2020 attributed to open biomass burning – indicating how extreme the 2020 wildfire season was and how severe future Arctic wildfire seasons can potentially be. (5) What works in the boreal zones to prevent and fight wildfires may not work in the Arctic. Fire management will need to adapt to a changing climate, economic development, the Indigenous and local communities, and fragile northern ecosystems, including permafrost and peatlands. (6) Factors contributing to the uncertainty of predicting and quantifying future Arctic fire regimes include underestimation of Arctic fires by satellite systems, lack of agreement between Earth observations and official statistics, and still needed refinements of location, conditions, and previous fire return intervals on peat and permafrost landscapes. This review highlights that much research is needed in order to understand the local and regional impacts of the changing Arctic fire regime on emissions and the global climate, ecosystems, and pan-Arctic communities.
2021