Found 2670 publications. Showing page 63 of 267:
Atmospheric inversions have been used for the past two decades to derive large-scale constraints on the sources and sinks of CO2 into the atmosphere. The development of dense in situ surface observation networks, such as ICOS in Europe, enables in theory inversions at a resolution close to the country scale in Europe. This has led to the development of many regional inversion systems capable of assimilating these high-resolution data, in Europe and elsewhere. The EUROCOM (European atmospheric transport inversion comparison) project is a collaboration between seven European research institutes, which aims at producing a collective assessment of the net carbon flux between the terrestrial ecosystems and the atmosphere in Europe for the period 2006–2015. It aims in particular at investigating the capacity of the inversions to deliver consistent flux estimates from the country scale up to the continental scale.
The project participants were provided with a common database of in situ-observed CO2 concentrations (including the observation sites that are now part of the ICOS network) and were tasked with providing their best estimate of the net terrestrial carbon flux for that period, and for a large domain covering the entire European Union. The inversion systems differ by the transport model, the inversion approach, and the choice of observation and prior constraints, enabling us to widely explore the space of uncertainties.
This paper describes the intercomparison protocol and the participating systems, and it presents the first results from a reference set of inversions, at the continental scale and in four large regions. At the continental scale, the regional inversions support the assumption that European ecosystems are a relatively small sink (−0.21±0.2
Pg C yr−1). We find that the convergence of the regional inversions at this scale is not better than that obtained in state-of-the-art global inversions. However, more robust results are obtained for sub-regions within Europe, and in these areas with dense observational coverage, the objective of delivering robust country-scale flux estimates appears achievable in the near future.
2020
Global occurrence, chemical properties, and ecological impacts of e-wastes (IUPAC Technical Report)
The waste stream of obsolete electronic equipment grows exponentially, creating a worldwide pollution and resource problem. Electrical and electronic waste (e-waste) comprises a heterogeneous mix of glass, plastics (including flame retardants and other additives), metals (including rare Earth elements), and metalloids. The e-waste issue is complex and multi-faceted. In examining the different aspects of e-waste, informal recycling in developing countries has been identified as a primary concern, due to widespread illegal shipments; weak environmental, as well as health and safety, regulations; lack of technology; and inadequate waste treatment structure. For example, Nigeria, Ghana, India, Pakistan, and China have all been identified as hotspots for the disposal of e-waste. This article presents a critical examination on the chemical nature of e-waste and the resulting environmental impacts on, for example, microbial biodiversity, flora, and fauna in e-waste recycling sites around the world. It highlights the different types of risk assessment approaches required when evaluating the ecological impact of e-waste. Additionally, it presents examples of chemistry playing a role in potential solutions. The information presented here will be informative to relevant stakeholders seeking to devise integrated management strategies to tackle this global environmental concern.
2020
Solar irradiance has been universally acknowledged to be dominant by quasi-decadal variability, which has been adopted frequently to investigate its effect on climate decadal variability. As one major terrestrial energy source, solar-wind energy flux into Earth's magnetosphere (Ein) exhibits dramatic interannual variation, the effect of which on Earth's climate, however, has not drawn much attention. Based on the Ein estimated by 3D magnetohydrodynamic simulations, we demonstrate a novelty that the annual mean Ein can explain up to 25% total interannual variance of the northern-hemispheric temperature in the subsequent boreal winter. The concurrent anomalous atmospheric circulation resembles the positive phase of Arctic Oscillation/North Atlantic Oscillation. The warm anomalies in the tropic stratopause and tropopause induced by increased solar-wind–magnetosphere energy persist into the subsequent winter. Due to the dominant change in the polar vortex and mid-latitude westerly in boreal winter, a ‘top-down’ propagation of the stationary planetary wave emerges in the Northern Hemisphere and further influences the atmospheric circulation and climate.
2020
Polycyclic aromatic hydrocarbons (PAHs) are not
declining in Arctic air despite reductions in their global emissions.
In Svalbard, the Longyearbyen coal-fired power plant
is considered to be one of the major local sources of PAHs.
Power plant stack emissions and ambient air samples, collected
simultaneously at 1 km (UNIS) and 6 km (Adventdalen)
transect distance, were analysed (gaseous and particulate
phases separately) for 22 nitro-PAHs, 8 oxy-PAHs,
and 16 parent PAHs by gas chromatography in combination
with single quadrupole electron capture negative ionization
mass spectrometry (GC-ECNI-MS) and gas chromatography
in combination with triple quadrupole electron ionization
mass spectrometry (GC-EI-MS/MS). Results confirm low
levels of PAH emissions (Sum 16 PAHs D 1:5 μg/kg coal)
from the power plant. Phenanthrene, 9,10-anthraquinone, 9-
fluorenone, fluorene, fluoranthene, and pyrene accounted for
85% of the plant emission (not including naphthalene). A dilution
effect was observed for the transect ambient air samples:
1.26+/- 0.16 and 0.63+/- 0.14 ng/m3 were the sum of all
47 PAH derivatives for UNIS and Adventdalen, respectively.
The PAH profile was homogeneous for these recipient stations
with phenanthrene and 9-fluorenone being most abundant.
Multivariate statistical analysis confirmed coal combustion
and vehicle and marine traffic as the predominant
sources of PAHs. Secondary atmospheric formation of 9-
nitroanthracene and 2C3-nitrofluoranthene was evaluated
and concluded. PAHs partitioning between gaseous and particulate
phases showed a strong dependence on ambient temperatures
and humidity. The present study contributes important
data which can be utilized to eliminate uncertainties in
model predictions that aim to assess the extent and impacts
of Arctic atmospheric contaminants.
2020
Estimates of past emission inventories suggest that toxic heavy metal pollution in Europe was highest in the mid‐1970s for lead and in the mid‐1960s for cadmium, but these previous estimates have not been compared to observations. Here, alpine ice‐cores were used to document cadmium and lead pollution in western Europe between 1890 and 2000. The ice‐core trends show that while lead pollution largely from leaded gasoline reached a maximum in ~1975 as expected, cadmium pollution primarily from zinc smelters peaked in the early‐1980s rather than in ~1965 and was up to fourfold higher than estimated after 1975. Comparisons between ice‐core trends, estimated past emissions, and state‐of‐the‐art atmospheric aerosol transport and deposition modeling suggest that the estimated decreases in cadmium emissions after 1970 were based on overly optimistic emissions reductions from the introduction of pollution control devices and other technological improvements.
2020
We present an observing simulated system experiment (OSSE) dedicated to evaluate the potential added value from the Sentinel-4 and the Sentinel-5P observations on tropospheric ozone composition. For this purpose, the ozone data of Sentinel-4 (Ultraviolet Visible Near-infrared) and Sentinel-5P (TROPOspheric Monitoring Instrument) on board a geostationary (GEO) and a low-Earth-orbit (LEO) platform, respectively, have been simulated using the DISAMAR inversion package for the summer 2003. To ensure the robustness of the results, the OSSE has been configured with conservative assumptions. We simulate the reality by combining two chemistry transport models (CTMs): the LOng Term Ozone Simulation - EURopean Operational Smog (LOTOS-EUROS) and the Transport Model version 5 (TM5). The assimilation system is based on a different CTM, the MOdele de Chimie Atmospherique a Grande Echelle (MOCAGE), combined with the 3-D variational technique. The background error covariance matrix does not evolve in time and its variance is proportional to the field values. The simulated data are formed of six eigenvectors to minimize the size of the dataset by removing the noise-dominated part of the observations. The results show that the satellite data clearly bring direct added value around 200 hPa for the whole assimilation period and for the whole European domain, while a likely indirect added value is identified but not for the whole period and domain at 500 hPa, and to a lower extent at 700 hPa. In addition, the ozone added value from Sentinel-5P (LEO) appears close to that from Sentinel-4 (GEO) in the free troposphere (200-500 hPa) in our OSSE. The outcome of our study is a result of the OSSE design and the choice within each of the components of the system.
2020
A schematic sampling protocol for contaminant monitoring in raptors
Birds of prey, owls and falcons are widely used as sentinel species in raptor biomonitoring programmes. A major current challenge is to facilitate large-scale biomonitoring by coordinating contaminant monitoring activities and by building capacity across countries. This requires sharing, dissemination and adoption of best practices addressed by the Networking Programme Research and Monitoring for and with Raptors in Europe (EURAPMON) and now being advanced by the ongoing international COST Action European Raptor Biomonitoring Facility. The present perspective introduces a schematic sampling protocol for contaminant monitoring in raptors. We provide guidance on sample collection with a view to increasing sampling capacity across countries, ensuring appropriate quality of samples and facilitating harmonization of procedures to maximize the reliability, comparability and interoperability of data. The here presented protocol can be used by professionals and volunteers as a standard guide to ensure harmonised sampling methods for contaminant monitoring in raptors.
2020
Validation of SMILES HCl profiles over a wide range from the stratosphere to the lower thermosphere
Hydrogen chloride (HCl) is the most abundant (more than 95 %) among inorganic chlorine compounds Cly in the upper stratosphere. The HCl molecule is observed to obtain long-term quantitative estimations of the total budget of the stratospheric chlorine compounds. In this study, we provided HCl vertical profiles at altitudes of 16–100 km using the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) from space. The HCl vertical profile from the upper troposphere to the lower thermosphere is reported for the first time from SMILES observations; the data quality is quantified by comparison with other measurements and via theoretical error analysis. We used the SMILES level-2 research product version 3.0.0. The period of the SMILES HCl observation was from 12 October 2009 to 21 April 2010, and the latitude coverage was 40∘ S–65∘ N. The average HCl vertical profile showed an increase with altitude up to the stratopause (∼ 45 km), approximately constant values between the stratopause and the upper mesosphere (∼ 80 km), and a decrease from the mesopause to the lower thermosphere (∼ 100 km). This behavior was observed in all latitude regions and reproduced by the Whole Atmosphere Community Climate Model in the specified dynamics configuration (SD-WACCM). We compared the SMILES HCl vertical profiles in the stratosphere and lower mesosphere with HCl profiles from Microwave Limb Sounder (MLS) on the Aura satellite, as well as from the Atmospheric Chemistry Experiment Fourier Transform Spectrometer (ACE-FTS) on SCISAT and the TErahertz and submillimeter LImb Sounder (TELIS) (balloon borne). The TELIS observations were performed using the superconductive limb emission technique, as used by SMILES. The globally averaged vertical HCl profiles of SMILES agreed well with those of MLS and ACE-FTS within 0.25 and 0.2 ppbv between 20 and 40 km (within 10 % between 30 and 40 km; there is a larger discrepancy below 30 km), respectively. The SMILES HCl concentration was smaller than those of MLS and ACE-FTS as the altitude increased from 40 km, and the difference was approximately 0.4–0.5 ppbv (12 %–15 %) at 50–60 km. The difference between SMILES and TELIS HCl observations was about 0.3 ppbv in the polar winter region between 20 and 34 km, except near 26 km. SMILES HCl error sources that may cause discrepancies with the other observations are investigated by a theoretical error analysis. We calculated errors caused by the uncertainties of spectroscopic parameters, instrument functions, and atmospheric temperature profiles. The Jacobian for the temperature explains the negative bias of the SMILES HCl concentrations at 50–60 km.
2020
This work aimed to identify the major source(s) of faecal pollution impacting Salcott Creek oyster fisheries in the UK through the examination of the sterol profiles. The concentration of the major sewage biomarker, coprostanol, in water overlying the oysters varied between 0.01 µg L−1 and 1.20 µg L−1. The coprostanol/epicoprostanol ratio ranged from 1.32 (September) to 33.25 (February), suggesting that human sewage represents the key input of faecal material into the estuary. However, a correlation between the sterol profile of water above the oysters with that of water that enters from Tiptree Sewage Treatment Works (r = 0.82), and a sample from a site (Quinces Corner) observed to have a high population of Brent geese (r = 0.82), suggests that both sources contribute to the faecal pollution affecting the oysters. In identifying these key faecal inputs, sterol profiling has allowed targeted management practices to be employed to ensure that oyster quality is optimised.
2020
An overview of the uses of per- And polyfluoroalkyl substances (PFAS)
Per- and polyfluoroalkyl substances (PFAS) are of concern because of their high persistence (or that of their degradation products) and their impacts on human and environmental health that are known or can be deduced from some well-studied PFAS. Currently, many different PFAS (on the order of several thousands) are used in a wide range of applications, and there is no comprehensive source of information on the many individual substances and their functions in different applications. Here we provide a broad overview of many use categories where PFAS have been employed and for which function; we also specify which PFAS have been used and discuss the magnitude of the uses. Despite being non-exhaustive, our study clearly demonstrates that PFAS are used in almost all industry branches and many consumer products. In total, more than 200 use categories and subcategories are identified for more than 1400 individual PFAS. In addition to well-known categories such as textile impregnation, fire-fighting foam, and electroplating, the identified use categories also include many categories not described in the scientific literature, including PFAS in ammunition, climbing ropes, guitar strings, artificial turf, and soil remediation. We further discuss several use categories that may be prioritised for finding PFAS-free alternatives. Besides the detailed description of use categories, the present study also provides a list of the identified PFAS per use category, including their exact masses for future analytical studies aiming to identify additional PFAS.
2020